CHEM-WAY INC -- DOT 3 BRAKE FLUID  -- 9150-00N073586
<pre>=====================  Product Identification  =====================

Product ID:DOT 3 BRAKE FLUID
MSDS Date:07/07/1995
FSC:9150
NIIN:00N073586
=== Responsible Party ===
Company Name:CHEM-WAY INC
Box:1625
City:BAY CITY
State:TX
ZIP:77404-1625
Country:US
Info Phone Num:409-245-8811
Emergency Phone Num:409-245-9161
CAGE:CHEMW
=== Contractor Identification ===
Company Name:CHEM-WAY INC
Box:1625
City:BAY CITY
State:TX
ZIP:77404-1625
Country:US
Phone:409-245-8811
CAGE:CHEMW

=============  Composition/Information on Ingredients  =============

Ingred Name:TRIETHYLENE GLYCOL
CAS:112-27-6
RTECS #:YE4550000
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:TETRAETHYLENE GLYCOL
CAS:112-60-7
RTECS #:XC2100000
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:GLYCOLS; (C S GLYCOLS AND HEAVIER)
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:ETHANOL, 2-(2-METHOXYETHOXY)-; (DIETHYLENE GLYCOL
    MONOMETHYL ETHER)
CAS:111-77-3
RTECS #:KL6125000
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:ETHANOL, 2-(2-ETHOXYETHOXY)-; (DIETHYLENE GLYCOL MONOETHYL
    ETHER)
CAS:111-90-0
RTECS #:KK8750000
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:ETHANOL, 2-(2-BUTOXYETHOXY)-; (DIETHYLENE GLYCOL MONOBUTYL
    ETHER)
CAS:112-34-5
RTECS #:KJ9100000
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: LETHARGY, NAUSEA FOR EXTENSIVE
    EXPOSURE: SOME DEFATTING OF THE SKIN MAY OCCUR ON CONTACT. CHRONIC:
    NONE SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PREEXISTING SKIN, EYES, RESPIRATORY
    DISORDERS, AND KIDNEY DISORDERS MAY BE AGGRAVATED BY EXPOSURE.

=======================  First Aid Measures  =======================

First Aid:SKIN: FLUSH WITH CLEAN WATER IN LARGE AMOUNTS. WASH OTHER
    SKIN AREAS WITH SOAP AND WATER. EYES: FLUSH FOR AT LEAST 15
    MINUTES. INHALATION: REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE
    OXYGEN OR ARTIFI CIAL RESPIRATION) . INGESTION: CALL MD IMMEDIATELY
    .

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:>275F,>135C
Extinguishing Media:USE FOAM, DRY CHEMICAL OR WATER.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . COOL CONTAINERS BEING EXPOSED TO FLAMES.
Unusual Fire/Explosion Hazard:NO UNUSUAL HAZARDS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:FOR SMALL SPILLS, USE AN ABSORBENT AND DISPOSE
    OF PROPERLY. FOR LARGE SPILLS, CONTAIN WITH DIKES AND REMOVE WITH
    VACUUM TRUCK TO SALVAGE CONTAINERS FOR PROPER DISPOSAL. WEAR
    PROTECTIVE CLOTHING.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:PREVENT MOISTURE FROM CONTAMINATING
    THE MATERIAL DUE TO ITS HYGROSCOPICITY.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH APPROVED RESPIRATORS IF VAPOR
    CONCENTRATION IS HIGH.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER MEETING
    ANSI DESIGN CRITERIA . WEAR CHEMICALLY RESISTANT FOOTWEAR & APRON.
Work Hygienic Practices:USE GOOD HYGIENE PRACTICE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:480F,249C
Vapor Density:>1.0
Spec Gravity:1.0 (H*2O=1)
Evaporation Rate &amp; Reference:<0.01
Solubility in Water:MISCIBLE
Appearance and Odor:YELLOW TO AMBER FLUID COLOR, WITH MILD ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

====================  Disposal Considerations  ====================

Waste Disposal Methods:CAN BE INCINERATED IN ACCORDANCE WITH ALL STATE,
    LOCAL, AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.