TERAND INDUSTRIES INC -- STAINLESS STEEL & METAL POLISH -- 7930-00N018931 
=====================  Product Identification  =====================

Product ID:STAINLESS STEEL & METAL POLISH
MSDS Date:11/10/1988
FSC:7930
NIIN:00N018931
=== Responsible Party ===
Company Name:TERAND INDUSTRIES INC
Box:9947
City:FT LAUDERDALE
State:FL
ZIP:33310
Country:US
Info Phone Num:305-974-5440
Emergency Phone Num:305-974-5440
Preparer's Name:JOSE SUIRLLAGE
CAGE:OO296
=== Contractor Identification ===
Company Name:TERAND INDUSTRIES, INC.
Box:9947
City:FT. LAUNDERDALE
State:FL
ZIP:33310
Phone:305-974-5440
CAGE:OO296

=============  Composition/Information on Ingredients  =============

Ingred Name:MINERAL SPIRITS
CAS:64742-88-7

Ingred Name:MINERAL OIL (EXPOSURE REGULATED AS 'OIL MIST')
CAS:8012-95-1
RTECS #:PY8030000
OSHA PEL:5 MG/M3
ACGIH TLV:5 MG/M3/10 STEL;9192

Ingred Name:ISOPROPYL ALCOHOL  (SARA III)
CAS:67-63-0
RTECS #:NT8050000
OSHA PEL:400 PPM/500 STEL
ACGIH TLV:400 PPM/500STEL;9192

Ingred Name:CARBON DIOXIDE
CAS:124-38-9
RTECS #:FF6400000
OSHA PEL:5000 PPM
ACGIH TLV:5000PPM/30000STEL;93

Ingred Name:SUPP DATA: FATAL. PRESSURIZED CNTNRS MUST NOT BE EXPOS TO
    TEMPS >120F & SPRAY SHOULD NOT BE DIRECTED TOWARD FACE (ING 7)
RTECS #:9999999ZZ

Ingred Name:ING 6: OR EYES, OPEN FLAME OR OTHER SOURCE OF IGNITION.
RTECS #:9999999ZZ

Ingred Name:METHYL CHLOROFORM (1,1,1-TRICHLOROEHANE)  (SARA III)
CAS:71-55-6
RTECS #:KJ2975000
OSHA PEL:350 PPM/450 STEL
ACGIH TLV:350 PPM/450STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Ozone Depleting Chemical:1

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHAL:EXCESS INHAL OF VAPS CAN CAUSE
    NASAL & RESP IRRIT/DIZZ/WEAKNESS/FATIGUE/NAUSEA/HDCH & POSSIBLE
    UNCON. SKIN: PRLNG/ RPTD CNTCT CAN CAUSE MODERATE IRRIT, DEFAT &
    DERMATITIS. INGEST:CAN CAUSE GI IR RIT/NAUSEA/VOMIT & DIARRHEA.
    ASPIR OF MATL INTO LUNGS CAN CAUSE CHEM PNEUMONITIS. EYES: CAN
    CAUSE SEVERE (EFTS OF OVEREX
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:IRRIT/REDNESS/TEARING/BLURRED VISION.
    CHLOROCARBON MATLS HAVE PRODUCED SENSIT OF MYOCARDIUM TO
    EPINEPHRINE IN LAB ANIMALS & COULD HAVE SIMILAR EFT IN HUMANS.
    ADRENOMIMETICS (E.G., EPINEPHRINE ) MAY BE CONTRAINDICATED EXCEPT
    FOR LIFE- SUSTAINING USES IN HUMANS ACUTELY/CHRONICALLY EXPOSED TO
    CHLOROCARBONS .
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/WATER FOR AT LEAST 15 MIN, LIFTING UPPER &
    LOWER LIDS. GET MEDICAL ATTENTION. SKIN: WASH EXPOSED AREAS W/SOAP
    & WATER. INHAL: REMOVE TO FRESH AIR. IF BREATHING IS DIFFICULT,
    GIVE OXYGEN.  IF BREATHING STOPS GIVE ARTF RESP. GETMEDICAL
    ATTENTION. INGEST: DO NOT INDUCE VOMITING. GET MEDICAL ATTENTION.
    ASPIRATION OF MATERIAL INTO LUNGS DUE TO VOMITING CAN CAUSE
    CHEMICAL PNEUMONITIS.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TOC
Flash Point:90.0F,32.2C
Extinguishing Media:FOAM, DRY CHEMICAL OR CARBON DIOXIDE.
Fire Fighting Procedures:KEEP CNTNRS COOL. USE EQUIP/SHIELDING REQUIRED
    TO PROT PERSONNEL AGAINST BURSTING, RUPTURING/VENTING CNTNRS. WEAR
    NIOSH/MSHA APPRVD PRESS DEMAND SCBA(SUPP DATA)
Unusual Fire/Explosion Hazard:AT ELEVATED TEMPERATURES (ABOVE 120 F)
    CONTAINERS MAY VENT RUPTURE OR BURST. THERMAL DECOMPOSITION
    PRODUCTS MAY INCLUDE HCL & PHOSGENE .

==================  Accidental Release Measures  ==================

Spill Release Procedures:CLEAN UP AREA BY MOPPING OR WITH ABSORBENT
    MATERIALS AND PLACE IN CLOSED CONTAINERS FOR DISPOSAL. CONTACT
    FEDERAL, STATE OR LOCAL AUTHORITIES FOR APPROVED DISPOSAL
    PROCEDURES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE AT TEMP > 120F. PLEASE
    READ & FOLLOW DIRECTIONS ON PROD LABEL: THEY ARE YOUR BEST GUIDE TO
    USING THIS PROD IN THE MOST (SUPP DATA)
Other Precautions:NO SMOKING IN AREA OF USE. DO NOT USE IN THE GENERAL
    VICINITY OF ARC WELDING, OPEN FLAMES OR HOT SURFACES. HEAT &/OR UV
    RADIATION MAY CAUSE THE FORMATION OF HCL AND/OR PHOSGENE .

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:GENERAL VENTILATION ADEQUATE. NIOSH/MSHA
    APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:PROVIDE SUFFICIENT MECHANICAL (GENERAL) AND/OR LOCAL
    EXHAUST VENTILATION TO MAINTAIN EXPOSURE BELOW TLV(S).
Protective Gloves:NEOPRENE/NITRILE RUBBER OR (SUPP DATA)
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:DON'T EAT, DRINK OR SMOKE IN WORK AREA. WASH
    HANDS BEFORE EATING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
PROT GLOVES:POLYVINYL CHLORIDE. FIRE FIGHT PROC: & FULL PROT EQUIP .
    HNDLG/STOR PREC:EFTIVE WAY, & THEY ALSO GIVE THE NEC SAFETY PREC TO
    PROT YOUR HLTH. AEROSOL PROD PRESENT LIMITED HAZ DURING S
    TORAGE/USE IF LABEL PREC ARE FOLLOWED. INTENTIONAL MIS-USE BY DELIB
    CONC & INHAL OF CONTENTS CAN BE HARMFUL OR (ING 6)

==================  Physical/Chemical Properties  ==================

HCC:F3
Vapor Pres:90 PSIG
Spec Gravity:0.925
Solubility in Water:SLIGHT
Appearance and Odor:CLEAR WATER WHITE LIQUID/MILD SWEETISH ODOR.
Percent Volatiles by Volume:> 90

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES, OXIDIZERS, ALUMINUM AND OTHER REACTIVE METALS.
Stability Condition to Avoid:DO NOT EXPOSE TO TEMPERATURES ABOVE 120 F.
Hazardous Decomposition Products:AT ABNORMALLY HIGH TEMPERATURES
    POSSIBLE TRACE AMOUNTS OF PHOSGENE. HCL .

====================  Disposal Considerations  ====================

Waste Disposal Methods:WHEN USED PROPERLY AEROSOL PROD DO NOT GENERATE
    HAZ WASTE. EMPTY DE-PRESSURIZED CNTNRS. CAN NOT BE REUSED & SHOULD
    BE WRAPPED & PUT IN PERMITTED WASTE MANAGEMENT FACILITY. CONSULT
    FEDERAL, STATE, & LO CAL DISPOSAL AUTHORITIES FOR APPROVED
    PROCEDURES.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.