PPG IND INC -- 50-350, ATHLETIC FIELD MARKING PAINT -- 8010-00N029951 
=====================  Product Identification  =====================

Product ID:50-350, ATHLETIC FIELD MARKING PAINT
MSDS Date:06/05/1990
FSC:8010
NIIN:00N029951
=== Responsible Party ===
Company Name:PPG IND INC
Address:260 KAPPA DR
City:PITTSBURGH
State:PA
ZIP:15238
Country:US
Info Phone Num:412-492-5555;800-441-9695
Emergency Phone Num:304-843-1300
CAGE:OHGX4
=== Contractor Identification ===
Company Name:PPG IND INC
Address:3938 PORETT DR
Box:9
City:GURNEE
State:IL
ZIP:60031
Country:US
Phone:304-843-1300
CAGE:OHGX4
Company Name:PPG INDUSTRIES INC
Address:ONE PPG PLACE
Box:City:PITTSBURGH
State:PA
ZIP:15272
Country:US
Phone:1-800-245-2974 (CAL HYPO)
CAGE:47695

=============  Composition/Information on Ingredients  =============

Ingred Name:SILICA, CRYSTALLINE - FUSED
CAS:60676-86-0
RTECS #:VV7328000
Fraction by Wt: 2-5%
OSHA PEL:SEE TABLE Z3
ACGIH TLV:0.1 MG/M3 RDUST;9293

Ingred Name:CALCIUM CARBONATE
CAS:1317-65-3
RTECS #:EV9580000
Fraction by Wt: 15-20%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST

Ingred Name:CLAY (KAOLIN); (ALUMINUM SILICATE)
CAS:1332-58-7
RTECS #:GF1670500
Fraction by Wt: 10-15%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:2 MG/M3 TDUST; 9293

Ingred Name:TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 2-5%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293

Ingred Name:WATER
CAS:7732-18-5
RTECS #:ZC0110000
Fraction by Wt: 35-40%

Ingred Name:WATER; (DEIONIZED WATER)
CAS:7732-18-5
RTECS #:ZC0110000
Fraction by Wt: 10-15%

Ingred Name:FILM FORMERS, RESINS, AND ADDITIVES
Fraction by Wt: 2-5%

Ingred Name:SILICA, CRYSTALLINE - CRISTOBALITE
CAS:14464-46-1
RTECS #:VV7325000
Fraction by Wt: 2-5%
OSHA PEL:SEE TABLE Z3
ACGIH TLV:0.05 MG/M3 RDUST9293

Ingred Name:SUPP DATA: DUST. APPLIC OF PROD IS NOT EXPECTED TO GENERATE
    EXCESSIVE AMTS OF RESP SILICA, SO POTENTIAL HAZ (ING 11)
RTECS #:9999999ZZ

Ingred Name:ING 10: FOR HUMANS IS LIMITED.
RTECS #:9999999ZZ

Ingred Name:FIRST AID PROC: EXPOSURE TO CORROSIVE MATERIAL, PERSISTENT
    SKIN/EYE IRRITATION OR BREATHING DIFFICULTIES.
RTECS #:9999999ZZ

Ingred Name:VENT: LOWEST SUGGESTED EXPOS LIMITS, LEL IN FIRE & EXPLO
    HAZ BELOW STATED LIMITS, & TO REMOVE DECOMP PRODS (ING 14)
RTECS #:9999999ZZ

Ingred Name:ING 13: DURING WELDING OR FLAME CUTTING SURFACES COATED
    WITH THIS PRODUCT.
RTECS #:9999999ZZ

Ingred Name:CLAY (KAOLIN); (ALUMINUM SILICATE)
CAS:1332-58-7
RTECS #:GF1670500
Fraction by Wt: 1-2%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:2 MG/M3 TDUST; 9293

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:YES    IARC:YES	  OSHA:NO
Health Hazards Acute and Chronic:(ACUTE) INGEST: HARMFUL IF SWALLOWED.
    EYE: CAUSES EYE IRRIT. SKIN: MAY CAUSE SLIGHT SKIN IRRIT. INHAL:
    VAP/SPRAY MIST MAY BE HARMFUL IF INHALED. SANDING & GRINDING DUSTS
    MAY BE HARMFUL IF INHALED. (CH RONIC) AVOID LONG TERM & RPTD CONT.
    PROD CONTAINS FORM OF CRYSTALLINE SILICA WHICH IARC ASSOC W/INCR
    RISK OF (SUPP DATA)
Explanation of Carcinogenicity:SILICA, CRYSTALLINE (CRISTOBALITE):
    ANTICIPATED TO BE A CARCINOGEN (NTP), 2A (IARC).
Effects of Overexposure:REDNESS, ITCHING, BURNING SENSATION AND VISUAL
    DISTURBANCES MAY INDICATE EXCESSIVE EYE CONTACT. DRYNESS, ITCHING,
    CRACKING, BURNING, REDNESS, AND SWELLING ARE CONDITIONS ASSOCIATED
    WITH EXCESSIVE SKIN  CONTACT.
Medical Cond Aggravated by Exposure:NOT APPLICABLE.

=======================  First Aid Measures  =======================

First Aid:INGEST: DO NO INDUCE VOMIT. EYE: FLUSH EYES IMMED W/PLENTY OF
    H2O FOR AT LEAST 15 MIN. SKIN: FLUSH IMMED W/PLENTY OF H2O FOLLOWED
    BY WASHING W/SOAP & H2O. INHAL: REMOVE TO FRESH AIR. APPLY ARTF
    RESP &  OTHER SUPPORTIVE MEASURES AS REQD. OTHER: IF ANY OF
    FOLLOWING OCCUR DURING/FOLLOWING USE OF PROD, CONT POIS CNTRL CNTR,
    EMER ROOM/PHYS IMMED. HAVE MSDS INFORM AVAIL. INGEST, EXCESSIVE
    (ING 12)

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Extinguishing Media:NFPA CLASS B EXTINGUISHERS (CARBON DIOXIDE, DRY
    CHEM/ UNIVERSAL AQUEOUS FILM FORMING FOAM).
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT
    EQUIP.H2O SPRAY MAY BE INEFT.H2O SPRAY MAY BE USED TO COOL CLSD
    CNTNRS TO PVNT PRESS BUILD-UP & POSS (SUPP DATA)
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE OR BURST
    (DUE TO BUILD-UP OF STEAM PRESSURE) WHEN EXPOSED TO EXTREME HEAT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:PROVIDE MAX VENT.ONLY PERSONNEL EQUIPPED WITH
    PROPER RESPIRATORY AND SKIN AND EYE PROT SHOULD BE PERMITTED IN
    AREA. REMOVE ALL SOURCES OF IGNITION. TAKE UP SPILLED MATERIAL WITH
    SAWDUST, VERMICULITE,  OR OTHER ABSORB MATL & PLACE INTO CNTNRS FOR
    DISP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
    QTYS IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA CLASS
    IIIB COMBUSTIBLE LIQUIDS. PROT FROM FREEZING.
Other Precautions:IF MATERIAL IS PART OF MULTIPLE COMPONENT COATING
    SYSTEM, READ MSDS FOR OTHER COMPONENT OF COMPONENTS BEFORE BLENDING
    AS RESULTING MIXTURE MAY HAVE HAZARDS OF ALL OF ITS PARTS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WHERE VENTILATION IS INADEQUATE, USE NIOSH/MSHA
    APPROVED SUITABLE RESPIRATOR.
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
    KEEP CONC OF INGREDS LISTED IN INGREDS SECTION BELOW (ING 13)
Protective Gloves:NITRILE, NEOPRENE, OR LATEX GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR PROTECTIVE CLOTHING, INCLUDING
    IMPERMEABLE APRON CONSTRUCTED OF NITRILE, NEOPRENE, OR LATEX.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
    SHOES.
Supplemental Safety and Health
FIRE FIGHT PROC: AUTOIGNIT/EXPLO WHEN EXPOS TO EXTREME HEAT. IF H2O
    USED, FOG NOZ ARE PREFERABLE. HAZ DECOMP PRODS: INCL: CO,
    FORMALDEHYDE. HLTH HAZ: CANCER IN LAB ANIMALS. LONG-TERM EXPOS TO
    CRYSTALL INE SILICA MAY ALSO LEAD TO DISABLING INJ KNOWN AS
    SILICOSIS. EFTS ARE ASSOC W/BRTHG EXCESSIVE AMTS OF SILICA (ING 10)

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:17.4
Vapor Density:HVR/AIR
Spec Gravity:1.38
Evaporation Rate & Reference:35 (BUOAC=100)
Solubility in Water:53.2%
Appearance and Odor:VISCOUS LIQ W/ODOR CHARACT OF CHEM FAMILY & ANY
    SOLV LISTED IN INGREDS SECTION.
Percent Volatiles by Volume:85.80

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PRODS WHEN
    HEATED. WELDING, BRAZING/FLAME-CUTTING ON SURFS COATED W/PROD MAY
    PRDCE FUMES(SUPP DATA)

====================  Disposal Considerations  ====================

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
    WITH FEDERAL, STATE, PROVINCIAL, AND LOCAL ENVIRONMENTAL CONTROL
    REGULATIONS. EMPTY CNTNRS SHOULD BE RECYCLED OR DISPOSED OF THROUGH
    AN APPROVED WASTE  MANAGEMENT FACILITY.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.