View Section :     1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
SECTION 1: CHEMICAL PRODUCT and COMPANY IDENTIFICATION Catalog No. 1600
Product Name: BEHR® Premium Plus Interior Flat Accent Base No. 1600
Manufacturer Name: BEHR Process Corporation
Address: 3400 W. Segerstrom Avenue
Santa Ana, CA 92704
Manufacturer MSDS Number: 1600
MSDS Revision Date : 11/15/2006
 
U.S. Contact Info.:
    Business Phone: (714) 545-7101
    Technical Service Phone: (800) 854-0133 ext. 2
    Business Fax: (714) 241-1002
 
Canadian Contact Info.:
    Business Phone: (800) 661-1591
    Technical Service Phone: (800) 661-1591
    Business Fax: (800) 387-0019
 

NFPA

1
1           0


HMIS

Health Hazard
1
Fire Hazard 1
Reactivity 0
Personal Protection
For emergencies in the US, call CHEMTREC: 800-424-9300
In Canada, call CANUTEC: (613) 996-6666 (call collect)
To Top of page
SECTION 2 : COMPOSITION, INFORMATION ON INGREDIENTS Catalog No. 1600
Chemical Name CAS# Lower
Percent		 Upper
Percent
Acrylic polymer(s) No data 10 30
Anhydrous aluminum silicate 66402-68-4 5 10
Hydrophobically-modified polyether solution No data 1 5
2-ethylhexyl benzoate 5444-75-7 1 5
Ethylene glycol 107-21-1 1 5
Nepheline Syenite 37244-96-5 10 30
Palygorskite 12174-11-7 0.1 1
Non-hazardous ingredients No data 30 60
Titanium dioxide 13463-67-7 5 10


To Top of page
SECTION 3: HAZARDS IDENTIFICATION Catalog No. 1600
Emergency Overview : Irritant.
 
Potential Health Effects :  
    Eye Contact: May cause irritation.
    Skin Contact: May cause irritation.
    Inhalation : Prolonged or excessive inhalation may cause respiratory tract irritation.
    ingestion : May be harmful if swallowed. May cause vomiting.
 
Chronic Health Effects : Prolonged or repeated contact may cause skin irritation.
Sign and Symptoms : Overexposure may cause headaches and dizziness.
Target Organ : Eyes. Skin. Respiratory system. Digestive system.
Pre-existing Conditions Aggravated by Exposure : None generally recognized.
To Top of page
SECTION 4: FIRST AID MEASURES Catalog No. 1600
Eye Contact: Immediately flush eyes with plenty of water for 15 to 20 minutes. Get medical attention, if irritation or symptoms of overexposure persists.
Skin Contact: Immediately wash skin with soap and plenty of water. Get medical attention if irritation develops or persists.
Inhalation : If inhaled, remove to fresh air. If not breathing, give artificial respiration or give oxygen by trained personnel. Seek immediate medical attention.
Ingestion : If swallowed, do NOT induce vomiting. Call a physician or poison control center immediately. Never give anything by mouth to an unconscious person.
Other First Aid : Due to possible aspiration into the lungs, DO NOT induce vomiting if ingested. Provide a glass of water to dilute the material in the stomach. If vomiting occurs naturally, have the person lean forward to reduce the risk of aspiration.
To Top of page
SECTION 5: FIRE FIGHTING MEASURES Catalog No. 1600
NFPA Flammability : 1
NFPA Health : 1
NFPA Reactivity : 0
Flash Point : No Data
Extinguishing Media : Use alcohol foam, carbon dioxide, dry chemical, or water fog or spray when fighting fires involving this material.
Protective Equipment : As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
To Top of page
SECTION 6 : ACCIDENTAL RELEASE MEASURES Catalog No. 1600
Personal Precautions : Use proper personal protective equipment as listed in section 8.
Spill Cleanup Measures : Absorb spill with inert material (e.g., dry sand or earth), then place in a chemical waste container. Provide ventilation. Clean up spills immediately observing precautions in the protective equipment section.
Environmental Precautions : Avoid runoff into storm sewers, ditches, and waterways.
To Top of page
SECTION 7 : HANDLING AND STORAGE Catalog No. 1600
Handling : Use with adequate ventilation. Avoid breathing vapor and contact with eyes, skin and clothing.
Storage : Store in a cool, dry, well ventilated area away from sources of heat, combustible materials, and incompatible substances. Keep container tightly closed when not in use.
Hygiene Practices : Wash thoroughly after handling. Avoid contact with eyes and skin. Avoid inhaling vapor or mist.
To Top of page
SECTION 8 : EXPOSURE CONTROLS, PERSONAL PROTECTION Catalog No. 1600
Engineering Controls : Use appropriate engineering control such as process enclosures, local exhaust ventilation, or other engineering controls to control airborne levels below recommended exposure limits. Good general ventilation should be sufficient to control airborne levels. Where such systems are not effective wear suitable personal protective equipment, which performs satisfactorily and meets OSHA or other recognized standards. Consult with local procedures for selection, training, inspection and maintenance o
Skin Protection : Chemical-resistant gloves and chemical goggles, face-shield and synthetic apron or coveralls should be used to prevent contact with eyes, skin or clothing.
Wear appropriate protective gloves. Consult glove manufacturer's data for permeability data.
Eye / Face Protection : Wear appropriate protective glasses or splash goggles as described by 29 CFR 1910.133, OSHA eye and face protection regulation, or the European standard EN 166.
Respiratory Protection : A NIOSH approved air-purifying respirator with an organic vapor cartridge or canister may be permissible under certain circumstances where airborne concentrations are expected to exceed exposure limits. Protection provided by air purifying respirators is limited. Use a positive pressure air supplied respirator if there is any potential for an uncontrolled release, exposure levels are not known, or any other circumstances where air purifying respirators may not provide adequate protection.
Other Protective : Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower.
Ethylene glycol:
Guideline ACGIH : TLV-STEL C 100 mg/m3 (Aerosol only)
Titanium dioxide:
Guideline ACGIH : TLV-TWA 10 mg/m3
Guideline OSHA : PEL TWA 15 mg/m3
To Top of page
SECTION 9 : PHYSICAL AND CHEMICAL PROPERTIES Catalog No. 1600
Physical State/Appearance : Liquid
pH : 8.5 to 9.5
Vapor Density : No Data
Vapor Pressure : No Data
Molecular Formula : Mixture
Molecular Weight : Mixture
Boiling Point : No Data
Melting / Freezing Point : No Data
To Top of page
SECTION 10 : STABILITY AND REACTIVITY Catalog No. 1600
Chemical Stability : Stable under normal temperatures and pressures.
Conditions To Avoid : Heat, flames, incompatible materials, and freezing or temperatures below 32 deg. F.
Incompatible Materials : Oxidizing agents. Strong acids and alkalis.
Hazardous Polymerization : Not reported.
Special Decomposition Products : Incomplete combustion may produce carbon monoxide and other toxic gases.
To Top of page
SECTION 11 : TOXICOLOGICAL INFORMATION Catalog No. 1600
Ethylene glycol:
Eye Effects: Eye - Rabbit; Standard Draize : 500 mg/24H; Mild.
Eye - Rabbit; Standard Draize : 1440 mg/6H; Moderate. (RTECS)
Skin Effects: Skin - Rabbit; Open irritation : 555 mg; Mild. (RTECS)
Inhalation Effects: Inhalation - Rat LC: >200 mg/m3/4H; Details of toxic effects not reported other than lethal dose value
Inhalation - Mouse LC: >200 mg/m3/2H; Details of toxic effects not reported other than lethal dose value (RTECS)
Ingestion Effects: Ingestion - Rat LD50: 4700 mg/kg; Details of toxic effects not reported other than lethal dose value. (RTECS)
Palygorskite:
Carcinogenicity : IARC: Group 2B: Possibly carcinogenic to humans
Titanium dioxide:
Skin Effects: Skin - Rabbit; Standard Draize : 300 ug/3D; (Intermittent) Mild. (RTECS)
Ingestion Effects: Ingestion - Rat TDLo: 60 gm/kg; Gastrointestinal - hypermotility, diarrhea Gastrointestinal - other changes. (RTECS)
Carcinogenicity : IARC: Group 2B: Possibly carcinogenic to humans
To Top of page
SECTION 12 : ECOLOGICAL INFORMATION Catalog No. 1600
Ecotoxicity : No ecotoxicity data was found for the product.
Environmental Fate : No environmental information found for this product.
To Top of page
SECTION 13 : DISPOSAL CONSIDERATIONS Catalog No. 1600
Waste Disposal : Consult with the US EPA Guidelines listed in 40 CFR Part 261.3 for the classifications of hazardous waste prior to disposal. Furthermore, consult with your state and local waste requirements or guidelines, if applicable, to ensure compliance. Arrange disposal in accordance to the EPA and/or state and local guidelines.
To Top of page
SECTION 14 : TRANSPORT INFORMATION Catalog No. 1600
DOT UN Number : ACTIOPHRASE_93
DOT Hazard Class : No Data
To Top of page
SECTION 15 : REGULATORY INFORMATION Catalog No. 1600
Anhydrous aluminum silicate:
TSCA Inventory Status : Listed
Canada DSL : Listed
2-ethylhexyl benzoate:
TSCA Inventory Status : Listed
Canada DSL : Listed
Ethylene glycol:
TSCA Inventory Status : Listed
State : Listed in the New Jersey State Right to Know list.
Listed in the Pennsylvania Hazardous Subsatnces list.
Canada DSL : Listed
Nepheline Syenite:
TSCA Inventory Status : Not listed
Canada DSL : Listed
Palygorskite:
TSCA Inventory Status : Not listed
Canada DSL : Not listed
Titanium dioxide:
TSCA Inventory Status : Listed
State : Listed in the New Jersey State Right to Know list.
Listed in the Pennsylvania Hazardous Subsatnces list.
Canada DSL : Listed
To Top of page
SECTION 16 : ADDITIONAL INFORMATION Catalog No. 1600
HMIS Health Hazard : 1
HMIS FireHazard : 1
HMIS Reactivity : 0
MSDS Revision Date : 11/15/2006
Trademark : The trademarks, service marks, graphics and logos used on this MSDS are registered or unregistered trademarks of BEHR Process Corporation. All Rights Reserved.
Disclaimer : The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific materials designated. Refer to individual product safety Data sheets when using more than one product in combination with another.

 Copyright© 1996-2000 Actio Software Corporation. All Rights Reserved.

The trademarks, service marks, graphics and logos used on this MSDS are registered or unregistered trademarks of BEHR Process Corporation. All Rights Reserved.