PENNZOIL CO -- PENNZOIL HD MOTOR OIL SAE 10W-40 -- 9150-00F020236
===================== Product Identification ===================== Product ID:PENNZOIL HD MOTOR OIL SAE 10W-40 MSDS Date:06/19/1990 FSC:9150 NIIN:00F020236 === Responsible Party === Company Name:PENNZOIL CO Box:2967 City:HOUSTON State:TX ZIP:77252-2967 Info Phone Num:(713) 236-6070 Emergency Phone Num:(713) 236-6070 CAGE:01326 === Contractor Identification === Company Name:PENNZOIL CO Address:700 MILIAM PENNZOIL PL Box:2967 City:HOUSTON State:TX ZIP:77252-2967 Country:US Phone:800-546-6227 CAGE:01326 ============= Composition/Information on Ingredients ============= Ingred Name:PETROLEUM DISTILLATE, PETROLEUM OIL, BASE OIL AROMATIC PETROLEUM SOLVENT CAS:8002-05-9 RTECS #:SE7175000 Fraction by Wt: 75-85% Other REC Limits:10 MG/CUM STEL OSHA PEL:5 MG/CUM MIST ACGIH TLV:5 MG/CUM MIST Ingred Name:DETERGENT INHIBITOR SYSTEM Fraction by Wt: 5-15% Ingred Name:VISCOSITY INDEX IMPROVER Fraction by Wt: 5-15% Ingred Name:POUR POINT DEPRESSANT Fraction by Wt: <1% Ingred Name:ZINC CAS:7440-66-6 RTECS #:ZG8600000 Fraction by Wt: 1.7% ACGIH TLV:10 MG/CUM EPA Rpt Qty:1000 LBS DOT Rpt Qty:1000 LBS ===================== Hazards Identification ===================== Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:SKIN: IRRITATION, DERMATITIS, DRYNESS, CHAPPING, REDDENING, OIL ACNE, BLACKHEADS, & PHOTOSENSITIVITY. INGESTION: LAXATIVE PROPERTIES INCLUDING ABDOMINAL CRAMPS & DIARRHEA. INHALATION: PULMONARY DISEAS E SUCH AS CHRONIC LUNG INFLAMMATION, SHORTNESS OF BREATH, & COUGH. Explanation of Carcinogenicity:NONE Effects of Overexposure:SKIN: IRRITATION, DERMATITIS, DRYNESS, CHAPPING, REDDENING, OIL ACNE, BLACKHEADS, & PHOTOSENSITIVITY. INGESTION: LAXATIVE PROPERTIES INCLUDING ABDOMINAL CRAMPS, & DIARRHEA. INHALATION: PULMONARY DISEA SE SUCH AS LUNG INFLAMMATION, SHORTNESSOF BREATH, & COUGH. ======================= First Aid Measures ======================= First Aid:EYES: FLUSH W/WATER UNTIL IRRITATION SUBSIDES. IF MATERIAL IS HOT, TREAT FOR THERMAL BURNS. SKIN: WASH W/SOAP & WATER. IN MATERIAL IS HOT, SUBMERGE INJURED AREA IN COLD WATER. INHALATION: REMOVE TO FR ESH AIR. INGESTION: DON'T INDUCE VOMITING. OBTAIN MEDICAL ATTENTION IN ALL CASES. ===================== Fire Fighting Measures ===================== Flash Point Method:COC Flash Point:>385F Extinguishing Media:DRY CHEMICAL, FOAM, OR CO2 Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. USE CAUTION WHEN USING WATER OR FOAM AS FROTHING MAY OCCUR WHEN SPRAYED INTO CONTAINERS OF HOT, BURNING LIQUID. Unusual Fire/Explosion Hazard:DENSE SMOKE MAY BE GENERATED WHILE BURNING. AUTOIGNITION TEMPERATURE: >800F. ================== Accidental Release Measures ================== Spill Release Procedures:CONTAIN SPILL IMMEDIATELY. REMOVE ALL SOURCES OF IGNITION. ABSORB W/INERT MATERIAL SUCH AS SAND OR CLAY. PICK UP USING VACUUM PUMPS, SHOVELS, BUCKETS, OR OTHER MEANS & PLACE IN DRUMS OR OTHER SUITABLE CONTAINERS. ====================== Handling and Storage ====================== Handling and Storage Precautions:DON'T TRANSFER TO UNMARKED CONTAINERS. STORE AWAY FROM HEAT SOURCE. AVOID CONSUMPTION OF FOOD/BEVERAGE IN WORK AREAS WHERE HYDROCARBONS ARE PRESENT. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:USE A NIOSH APPORVED ORGANIC VAPOR RESPIRATOR W/DUST & MIST FILTER WHERE VAPOR OR MIST IS GENERATED. DON'T USE COMPRESSED OXYGEN IN HYDROCARBON ATMOSPHERES. Ventilation:ADEQUATE W/GOOD ENGINEERING PRACTICE TO MAINTAIN800F Melt/Freeze Pt:M.P/F.P Text:-25F Spec Gravity:0.875 Solubility in Water:EMULSIFIES Appearance and Odor:CLEAR TO LIGHT-RED W/LUBRICATING OIL ODOR ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES STRONG OXIDIZING AGENTS Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME, & OTHER SOURCES OF IGNITION Hazardous Decomposition Products:CO, CO2, & OTHER OXIDES ==================== Disposal Considerations ==================== Waste Disposal Methods:WASTE MATERIAL MAY BE LANDFILLED OR INCINERATED AT AN APPROVED FACILITY ACCORDING TO FEDERAL, STATE, & LOCAL REGULATIONS. MATERIALS SHOULD BE RECYCLED IF POSSIBLE. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.